Heating

Heating and Cooling

Heating and cooling your home uses more energy and drains more energy dollars than any other system in your home. Typically, 45% of your utility bill goes for heating and cooling. What's more, heating and cooling systems in the United States together emit 150 million tons of carbon dioxide into the atmosphere each year, adding to global climate change. They also generate about 12% of the nation's sulfur dioxide and 4% of the nitrogen oxides, the chief ingredients in acid rain.

No matter what kind of heating, ventilation, and air-conditioning system you have in your house, you can save money and increase your comfort by properly maintaining and upgrading your equipment. But remember, an energy-efficient furnace alone will not have as great an impact on your energy bills as using the whole-house approach. By combining proper equipment maintenance and upgrades with appropriate insulation, air sealing, and thermostat settings, you can cut your energy use for heating and cooling, and reduce environmental emissions, from 20% to 50%.

Heating and Cooling Tips

Set your thermostat as low as is comfortable in the winter and as high as is comfortable in the summer.
Clean or replace filters on furnaces once a month or as needed.
Clean warm-air registers, baseboard heaters, and radiators as needed; make sure they're not blocked by furniture, carpeting, or drapes.
Bleed trapped air from hot-water radiators once or twice a season; if in doubt about how to perform this task, call a professional.
Place heat-resistant radiator reflectors between exterior walls and the radiators.
Turn off kitchen, bath, and other exhaust fans within 20 minutes after you are done cooking or bathing; when replacing exhaust fans, consider installing high-efficiency, low-noise models.
During the heating season, keep the draperies and shades on your southfacing windows open during the day to allow the sunlight to enter your home and closed at night to reduce the chill you may feel from cold windows.
During the cooling season, keep the window coverings closed during the day to prevent solar gain.
$ Long-Term Savings Tip: Select energy-efficient products when you buy new heating and cooling equipment. Your contractor should be able to give you energy fact sheets for different types, models, and designs to help you compare energy usage. For furnaces, look for high Annual Fuel Utilization Efficiency (AFUE) ratings. The national minimum is 78% AFUE, but there are ENERGY STAR models on the market that exceed 90% AFUE.

$ Long-Term Savings Tip: For air conditioners, look for a high Seasonal Energy Efficiency Ratio (SEER). The current minimum is 13 SEER for central air conditioners. ENERGY STAR models are 13 SEER or more. The American Council for an Energy-Efficient Economy provides tips for buying energy-efficient furnaces, boilers, AC units, and heat pumps on its Web site.

Ducts

One of the most important systems in your home, though it's hidden beneath your feet and over your head, may be wasting a lot of your energy dollars. Your home's duct system, a branching network of tubes in the walls, floors, and ceilings, carries the air from your home's furnace and central air conditioner to each room. Ducts are made of sheet metal, fiber glass, or other materials.

Unfortunately, many duct systems are poorly insulated or not insulated properly. Ducts that leak heated air into unheated spaces can add hundreds of dollars a year to your heating and cooling bills. Insulating ducts that are in unconditioned spaces is usually very cost effective. If you are buying a new duct system, consider one that comes with insulation already installed.

Sealing your ducts to prevent leaks is even more important if the ducts are located in an unconditioned area such as an attic or vented crawl space. If the supply ducts are leaking, heated or cooled air can be forced out unsealed joints and lost. In addition, unconditioned air can be drawn into return ducts through unsealed joints. In the summer, hot attic air can be drawn in, increasing the load on the air conditioner. In the winter, your furnace will have to work longer to keep your house comfortable. Either way, your energy losses cost you money.

Although minor duct repairs are easy to do, ducts in unconditioned spaces should be sealed and insulated by qualified professionals using the appropriate sealing materials. Here are a few simple tips to help with minor duct repairs.

Duct Tips

Check your ducts for air leaks. First, look for sections that should be joined but have separated and then look for obvious holes.
If you use tape to seal your ducts, avoid cloth-backed, rubber adhesive duct tape, which tends to fail quickly. Researchers recommend other products to seal ducts: mastic, butyl tape, foil tape, or other heat approved tapes. Look for tape with the Underwriters Laboratories logo.
Remember that insulating ducts in the basement will make the basement colder. If both the ducts and the basement walls are uninsulated, consider insulating both.*
If your basement has been converted to a living area, hire a professional to install both supply and return registers in the basement rooms.
Be sure a well-sealed vapor barrier exists on the outside of the insulation on cooling ducts to prevent moisture buildup.
When doing ductwork, be sure to get professional help. Changes and repairs to a duct system should always be performed by a qualified professional.
Ducts that don't work properly can create serious, life-threatening carbon monoxide (CO) problems in the home. Install a CO monitor to alert you to harmful CO levels if you have a fuel-burning furnace, stove or other appliance, or an attached garage.
For new construction, consider placing ducts in conditioned space—space that is heated and cooled—instead of running ducts through unconditioned areas like the crawlspace or attic, which is less efficient.
$ Long-Term Savings Tip: You can lose up to 60% of your heated air before it reaches the register if your ducts aren't insulated and they travel through unheated spaces such as the attic or crawlspace. Get a qualified professional to help you insulate and repair ducts.

* Note: Water pipes and drains in unconditioned spaces could freeze and burst in the space if the heat ducts are fully insulated, because there would be no heat source to prevent the space from freezing in cold weather. However, using an electric heating tape wrap on the pipes can prevent this.

Heat Pumps

Heat pumps are the most efficient form of electric heating in moderate climates, providing three times more heating than the equivalent amount of energy they consume in electricity. There are three types of heat pumps: air-to-air, water source, and ground source.

They collect heat from the air, water, or ground outside your home and concentrate it for use inside. Heat pumps do double duty as a central air conditioner. They can also cool your home by collecting the heat inside your house and effectively pumping it outside. A heat pump can trim the amount of electricity you use for heating by as much as 30% to 40%.

Heat Pump Tips

Do not set back the heat pump's thermostat manually if it causes the electric resistance heating to come on. This type of heating, which is often used as a backup to the heat pump, is more expensive.
Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions.
$ Long-Term Savings Tip: If you use electricity to heat your home and live in a moderate climate, consider installing an energy-efficient heat pump system.

Solar Heating and Cooling

Using passive solar design techniques to heat and cool your home can be both environmentally friendly and cost effective. Passive solar heating techniques include placing larger, insulated windows on south-facing walls and locating thermal mass, such as a concrete slab floor or a heat-absorbing wall, close to the windows. In many cases, you can cut your heating costs by more than 50% compared with the cost of heating the same house that does not include passive solar design.

Passive solar design can also help reduce your cooling costs. Passive solar cooling techniques include carefully designed overhangs,windows with reflective coatings, and the use of reflective coatings on exterior walls and the roof.

A passive solar house requires careful design and site orientation, which depend on the local climate. So, if you are considering passive solar design for new construction or a major remodeling, you should consult an architect familiar with passive solar techniques.

Solar Tips

Keep all south-facing glass clean.
Make sure that objects do not block the sunlight shining on concrete slab floors or heat-absorbing walls.

Fireplaces

When you cozy up next to a crackling fire on a cold winter day, you probably don't realize that your fireplace is one of the most inefficient heat sources you can possibly use. It literally sends your energy dollars right up the chimney along with volumes of warm air. A roaring fire can exhaust as much as 24,000 cubic feet of air per hour to the outside, which must be replaced by cold air coming into the house from the outside. Your heating system must warm up this air, which is then exhausted through your chimney. If you use your conventional fireplace while your central heating system is on, these tips can help reduce energy losses.

Fireplace Tips

If you never use your fireplace, plug and seal the chimney flue.
Keep your fireplace damper closed unless a fire is going. Keeping the damper open is like keeping a window wide open during the winter; it allows warm air to go right up the chimney.
When you use the fireplace, reduce heat loss by opening dampers in the bottom of the firebox (if provided) or open the nearest window slightly—approximately 1 inch—and close doors leading into the room. Lower the thermostat setting to between 50° and 55°F.
Install tempered glass doors and a heat-air exchange system that blows warmed air back into the room.
Check the seal on the flue damper and make it as snug as possible.
Add caulking around the fireplace hearth.
Use grates made of C-shaped metal tubes to draw cool room air into the fireplace and circulate warm air back into the room.

Natural Gas and Oil Heating Systems

If you plan to buy a new heating system, ask your local utility or state energy office for information about the latest technologies available to consumers. They can advise you about more efficient systems on the market today. For example, many newer models incorporate designs for burners and heat exchangers that result in higher efficiencies during operation and reduce heat loss when the equipment is off. Consider a sealed combustion furnace; they are both safer and more efficient. Check the shopping guide in the back of this booklet for additional information on how to understand heating system ratings.

$ Long-Term Savings Tip: Install a new energy-efficient furnace to save money over the long term. Look for the ENERGY STAR and EnergyGuide labels.

Install a Carbon Monoxide Detector

Carbon monoxide (CO) detectors are highly recommended in homes with fuel-burning appliances, such as natural gas furnaces, stoves, ovens, and water heaters, and fuelburning space heaters. An alarm signals homeowners if CO reaches potentially dangerous levels.

Air Conditioners

It might surprise you to know that buying a bigger room air-conditioning unit won't necessarily make you feel more comfortable during the hot summer months. In fact, a room air conditioner that's too big for the area it is supposed to cool will perform less efficiently and less effectively than a smaller, properly sized unit. This is because room units work better if they run for relatively long periods of time than if they are continually switching off and on. Longer run times allow air conditioners to maintain a more constant room temperature and remove excess humidity.

Sizing is equally important for central air-conditioning systems, which need to be sized by professionals. If you have a central air system in your home, set the fan to shut off at the same time as the cooling unit (compressor). In other words, don't use the system's central fan to provide circulation, but instead use circulating fans in individual rooms.

Cooling Tips

Whole-house fans help cool your home by pulling cool air through the house and exhausting warm air through the attic. They are effective when operated at night and when the outside air is cooler than the inside.
Set your thermostat as high as comfortably possible in the summer. The less difference between the indoor and outdoor temperatures, the lower your overall cooling bill will be.
Don't set your thermostat at a colder setting than normal when you turn on your air conditioner. It will not cool your home any faster and could result in excessive cooling and, therefore, unnecessary expense.
Consider using an interior fan in conjunction with your window air conditioner to spread the cooled air more effectively through your home without greatly increasing your power use.
Don't place lamps or TV sets near your air-conditioning thermostat. The thermostat senses heat from these appliances, which can cause the air conditioner to run longer than necessary.
Plant trees or shrubs to shade air conditioning units but not to block the airflow. Place your room air conditioner on the north side of the house. A unit operating in the shade uses as much as 10% less electricity than the same one operating in the sun.
Keep in mind that insulation and sealing air leaks will help your energy performance in the summertime by keeping the cool air inside.
$ Long-Term Savings Tip: If your air conditioner is old, consider purchasing a new, energy-efficient model. You could save up to 50% on your utility bill for cooling. Look for the ENERGY STAR and EnergyGuide labels. The shopping guide in the back of this booklet will help you find the right size unit for your needs.
$ Long-Term Savings Tip: Consider installing a whole house fan or evaporative cooler if appropriate for your climate.

Programmable Thermostats

You can save as much as 10% a year on your heating and cooling bills by simply turning your thermostat back 10% to 15% for 8 hours. You can do this automatically without sacrificing comfort by installing an automatic setback or programmable thermostat.

Using a programmable thermostat, you can adjust the times you turn on the heating or air-conditioning according to a pre-set schedule. As a result, the equipment doesn't operate as much when you are asleep or when the house or part of the house is not occupied. Programmable thermostats can store and repeat multiple daily settings (six or more temperature settings a day) that you can manually override without affecting the rest of the daily or weekly program. When shopping for a programmable thermostat, be sure to look for the ENERGY STAR.

Landscaping

Landscaping is a natural and beautiful way to keep your home cool in summer and reduce your energy bills. In addition to adding aesthetic value and environmental quality to your home, a well-placed tree, shrub, or vine can deliver effective shade, act as a windbreak, and reduce overall energy bills.

Carefully positioned trees can save up to 25% of a typical household's energy used for cooling.

Studies conducted by Lawrence Berkeley National Laboratory found summer daytime air temperatures to be 3° to 6°F cooler in tree-shaded neighborhoods than in treeless areas.

The energy-conserving landscape strategies you should use for your home depend on the type of climate in which you live.

Source: U.S. Dept. of Energy